ZF Series Pre-setting and Load Testing Machine
We could supply 4 different types of testing machine: ZF50, ZF100, ZF 200 and ZF300, the respective Max. load is : 5kN, 10kN, 20kN and 30 kN ).
Main Technical Parameters
Max. load
|
50kN |
100kN |
200kN |
300kN |
Max. test load |
50kN |
100kN |
200kN |
300kN |
Max. pressing stroke |
700mm |
700mm |
700mm |
700mm |
Classification sizes of spring |
Max. length |
2500mm |
2500mm |
2500mm |
2500mm |
Max. width |
150mm |
150mm |
150mm |
150mm |
Max. deformation |
650mm |
650mm |
650mm |
650mm |
Accuracy of test |
Load |
0.5% |
|
|
|
Camber |
±0.1mm |
|
|
|
Productivity |
＜28s/set |
Grades of classification |
--, -, 0, +, ++ |
Technical Information for ZF-200 ( ZF-200 means Max. load 200 kN):
1. Load
Maximum Load………………………………………………200kN
Sensor available ……………………( 50kN, 100kN and 200kN )
2. Span and deflection
Maximum Span……………………………………………2200 mm
Maximum deflection…………………………………………650mm
(Standard is 550 above zero and 100 minus zero, total cylinder length 700mm)
3. Possibility to select the type of fashion of control:
Two pre setting and one testing ( P2T)
One pre setting and one testing (P1T)
Only testing (T1)
Only pre-setting (P1)
More testing modes are optional and need special programming.
4. Complete cycle for the control of the spring……………< 45 second
5. Parameter setting on PC and real time status showing on PC
Testing result ( 5 grade): “ --, -, 0, +, ++ ”will be showed on top of machine.
6. Number of working jigs:(includingV-block) ………………… 02 jigs.
7. Protecting device in use, orange one in the photo |
